Installation Guide: Corian Solid Surface Accessories
NO-DRILLING INSTALLATION: CLEAN, FAST AND SAFE
Forget about holes, dust and tools. We’ve designed our Corian accessories so you can install them in seconds.
What is included in your order?
- NovellShop accessory (with pre-installed double-sided technical tape).
- Special mounting adhesive tube.
What do you need to have on hand?
- A spirit level.
- A clean cloth (to clean the wall before starting).
3-STEP INSTALLATION GUIDE
- Prepares and Applies
Clean the area of the wall where you are going to place the fixture. Remove the blue double-sided tape protector that you will see on the back. Then apply 2 or 3 dots of the included adhesive in the free spaces (without touching the tape).
- Level
Present the fixture on the wall. Use your spirit level to make sure it is perfectly straight. The double-sided tape is very sticky, so be sure of the position before pressing down fully.
- Fixed
Once level, press the fixture firmly against the wall for 5 seconds and you’re done! The tape will secure the fixture instantly, while the adhesive cures to give it full long-term strength.
Pro Tip: Although attachment is immediate, we recommend waiting 24 hours before placing weight on the fixture to ensure that the adhesive has cured 100%.